Jump to content

Recommended Posts

Stage 2, face and arm:

774156576_Picture1.png.1d35798cde9603bcc320ee430c6a6ec3.png

 

The upper jaw connects with the eye piece from stage 1:

392981270_Picture2.png.bb8d409360c5f99630017494ef3c8b3e.png

 

Then I screw the two pieces together underneath using 2 screws (PB 2 x 6mm circled in red):

136353216_Picture3.png.56d6682756fcce8e41295f1e95ab9d5a.png

 

The teeth will not fit together nicely if they have plastic protruding out from the side. you can chop/sand them off. (Leave the two plastic bits sticking out the top):

693428827_Picture4.png.e5c0adf3cd265dbcaccf5aa257344e01.png

 

I fit the teeth in place without glue first so i know which places they go into. Then I apply some glue and stick them in:

2071427680_Picture5.png.d3db0b4df5d1f4fa1643060b09ac5f60.png

 

Screw the two right arm components together with 2 KB 6mm screws (circled in red). There is a notch on both parts which should align:

1477752246_Picture6.png.7cacf350910ba9faa9c0ee8ddfb6c74c.png

 

Stage 2 complete

1404040886_Picture7.png.0ff1181a5cef51ce8670746f52c467df.png

Link to post
Share on other sites
  • 1 month later...
21 hours ago, Beamerboy said:

Hi General Lou,

Do you believe that it is superglue (rather than anything else) that is required to perform an adequate join on the materials mentioned in the build instructions?

 

Hi Beamberboy,

Super glue works well for me because you only put a small amount, so it must be strong.  But any other glue should work if it is suitable for sticking plastic to metal or metal to metal.

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...