[Help with pack 12]

On 8/29/2022 at 10:23 AM, Ajacobi said:

So it’s ok for the power cable to be squished and have exposed metal?

One of your cables insulation looks to be damaged? Is it broken?

[Help with pack 12]

On 8/28/2022 at 4:04 AM, Ajacobi said:

I’m having the same issue, I just found my wire for the plug was damaged so I’m replacing it right now but I’ll keep in touch if it doesn’t fix my problem 

Voltage is approx 5v.

[Help with pack 12]

14 hours ago, Ajacobi said:

Isn’t it only able to go in one way?

 

Check the connections as Mark stated, mine was incorrectly manufactured and didn't operate as it should until I replaced it.

[Reset test]

Do you have the extension cable for the test board? 

[Zero Power connector Stage 85]

Hi, Parts 85-02 and 85-03 were incorrectly wired so basically check that the 2 parts use the same 4 connections 1,2,4,5,  3 is unused.

[Zero Display case]

Hi all, does anyone have any recommendations to buy an acrylic cover for the Zero display stand?

[Zero Power connector Stage 85]

Has anyone started pack 12 and noticed that the power connector has been incorrectly wired so that the aircraft will not fully function?

[Zero display stand]

Pics of the base after pack 11. All the lifting devices work and I checked the limit switches with a multi meter.

[Latest pics of my Zero]

Pics are after pack 11. I love the canopy.

[Pack 11 Gearbox Instruction Issue--Pay Attention to Camshaft Orientation-OR ELSE!]

Hi, I have added some pics of the fuselage and vertical stabiliser. The gap is  actually green paint as you can see there is no gap further up the fuselage. The stabiliser looks fine and central, in the video the weight of the plane makes it lean to the left so I have balanced it in the picture. 

[Pack 11 Gearbox Instruction Issue--Pay Attention to Camshaft Orientation-OR ELSE!]

You could power up the motor and set them as you want also. I test both motors before installing them. Very well noticed though with regard to the instructions.

[pack 9 question]

Hi, Yes I received the exact same part and informed Agora so I am expecting the other base board with pack 10 soon. I presumed it was a packing error.

[Where are my parts?]

On 3/10/2022 at 6:35 PM, nitropup55 said:

It's been a while since I have received any parts for the Zero. Is anybody else having this problem? The last pack I received was Pack 8, and that was like three months ago. Any thoughts?

Send Agora a message via your online account.

[Do the A6M 7.7 mm machine guns need to be drilled out so the LED will shine through?]

On 2/28/2022 at 4:56 AM, A6M5 said:

Hi John, seems you have an entirely different test set that attaches with the battery pack .  Mine comes with a board with lights and an adaption wire.  Also, my guns were solid plastic with no fiber cable.  I drilled a couple on mm to give the gun barrels some depth.

This is what I use to test the LED's and motors and cannons.

[Do the A6M 7.7 mm machine guns need to be drilled out so the LED will shine through?]

Definitely do not use any drill as they are fiber optics and you will damage them. Connect the guns/cannons to the test board LED socket and switch on. Check out my build on YouTube  John's model making....https://www.youtube.com/c/JohnsModelmaking

[Radial engine and propeller action.]

I have
tested all my lights, cockpit, nose guns and 20 mm cannons all shine at the tip. They look black due to the material they are made from, fiber optic. The landing gear can be fiddly and I have checked with a multi meter that the switches operate but i would like to test the function before covering them.

[Radial engine and propeller action.]

Hi, What I love about this build is the intricate detail of the engine and the near perfect propeller rotation. Follow the link to view a short video on YT.

https://youtu.be/JCLdyg5ZFwU

 

[Stage 34]

Hi, When do we get to test the landing gear motor? Can I test it before installing the motor?

[Zero pack 4 chat]

Thanks for the advice.

[Zero pack 4 chat]

Hi all, patiently waiting for pack 4 of the Zero to arrive, probably next week now which is a disappointment. Any lessons to learn from anyone who has assembled pack 4?

[My Modification]

I had a similar problem except I removed 05 extension cable as the engine noise was on constantly and no horn sound either but removing said cable all my electrics work fine. Also the rear lights connectors I had to tuck away as they just stopped the rear end from dropping into place.

Your pics look superb.

[Shelby Cobra build completed with 100% satisfaction.]

Readjusted the fuel pipe into the correct position. 

[Shelby Cobra build completed with 100% satisfaction.]

Well spotted. A mod maybe?

[Shelby Cobra build completed with 100% satisfaction.]

What an absolute beauty this car is.

Only 1 issue with pack 12 the cable 05 extension was removed due to a fault with the engine noise playing constantly other than that the pictures I have uploaded give a sample of its beauty.

[Antsy for the Routemaster debut!!]

I hope that any changes/mods are good for everyone and its a pity Agora don't provide a magazine with all the historical content that Hachette published.