Sooks569

I’m pretty sure that it’s just the On/OFF button for the remote.

I just finished pack 1 of the build. But, when I went to do the testing, nothing happens (not even the LED on the board). Fresh batteries, all putting out 1.6 bolts each. Is there a universal test box out there with different connector shaped and sizes out there that I can buy to test the wiring on these builds without relying solely on cheap test boards?

I ended up trimmed a couple turns off the spring, filing the sharp edges and added some silicone grease inside.

I ended up trimming the springs down 2 twists each. I already bought the fixes for the eyes, teeth, wrists and fingers.

It’s not Agora’s fault and it’s not just the USPS that has issues with deliveries. ALL the logistics companies have been off lately. I live in Florida and I’ve had a USPS package that went from Georgia, northern Florida, southern Florida, New York and back to Southern Florida again! Right now I am waiting on a replacement part from Deagostini that went from the UK, Miami (stuck there for 10 days), Georgia, The Netherlands, Brussels and finally made it back to Miami today (so I should hopefully get it after the holiday). This package was shipped on the 14th of August by DHL. I can tell you a few more tales about packages lately. Moral of the story, the delivery issues have to do with the package delivery company not the shipper. Hang in there and be patient!

I even used garage door lubricant spray and it still binds.

Definitely start with the eyes first! I have all of their T-800 mods so far. I agree that the finger joints can wait till the end, but I suggest getting the -6 length screws for the knuckle attachment for the though (it’s slightly thicker at that point). I believe they use M2.5-4 screws with their Mod, and a dab of superglue at one end of the brass knurled nut is the best thing that you can do (it’s easier to only need one Allen key to periodically tighten the screws because they will loosen over time). The teeth are great, just be gentle when seating them into place. Don’t even bother with the kit teeth. And the wrist joint are easy and self explanatory. You won’t need to get those till Pack 3 though.

Working on Stage 25 after assembling the joint I realized that the joint turns one direction fine but will not turn the direction. I know some people said to trim and/or file down the spring ends. Still no luck! I have the ends rounded and there is still binding. Anyone with a solution (preferably with photos)?

It would be interesting to see if they would be able to pull off not only the Auto-9 but also the automated leg holster.

Three Movie builds I would like to see would be Johnny 5 from Short Circuit (with the option to make the version from the 1st and 2nd movie), Robocop (To match up with the Terminator), and the ED-209 (Robocop).

I would love to be able to build aircraft that Sikorsky and Lockheed Martin build! More specifically the UH-60 Blackhawks (any variant) and the SR-71 Blackbird. but also: C-5 Galaxy C-17 Globalmaster III AC-130 Gunship

I have a Ram Rebel and would love to build one as a model.

I’m pretty sure it’s a Camaro going by the hood line on the sheeted photo. I had a 2016 and know the car pretty well, would love to build one.